Hotpoint AKL 909/IX Istruzioni per l'uso

3INSTRUCTION FOR USEINSTALLATION ...4ADVICE FOR SAFEGUARDING THE ENVIRONMENT...

123.Lift the bottom of the inside sheet of glass and remove it (fig. 6)4.Slip out the second and the third sheet of glass, paying particular attention

13Pay attention to the hinges when cleaning and/or removing the door (fig. 9).Changing the rear oven lamp bulb:1.Disconnect the oven from the electric

14TROUBLESHOOTING GUIDEOven not working:•Check for the presence of mains electrical power and if the oven is connected to the electrical supply.•Turn

4INSTALLATIONRecommendationsIMPORTANT: Disconnect the oven from the mains before carrying out any installation work or servicing.•Installation must be

5•For ovens installed under the worktop, leave a minimum clearance of 5 mm between the upper edge of the oven and the lower edge of the worktop (fig.

6Connecting the oven to the power supply•Make sure that the voltage indicated on the rating plate is the same as the mains voltage. The rating plate i

7ADVICE FOR SAFEGUARDING THE ENVIRONMENTDisposal of packaging materials•The packaging material is 100% recyclable and is marked with the recycle symbo

8•Never touch the oven with any wet part of the body and do not operate it with bare feet.•Do not pull the appliance or the power supply cable to disc

9OVEN ACCESSORIES Accessories supplied depend on the model. The accessories provided with the oven are listed in the Product Description Sheet provide

10CARE AND MAINTENANCEImportant: never clean the appliance with high pressure water or steam cleaning equipment.Exterior of the oven•Clean with a damp

11INSTRUCTIONS FOR REMOVING THE DOORAttention: When carrying out the following operations it is advisable to wear protective glovesThese instructions